Fly Agaric Resin Extract

A forum for discussing the various ways this mushroom can be prepared.
Post Reply
User avatar
tgt1002
Posts: 237
Joined: Sat Jun 13, 2020 2:31 am
Location: CT
Has thanked: 7 times
Been thanked: 66 times

Fly Agaric Resin Extract

Post by tgt1002 » Wed Aug 12, 2020 7:04 pm

I did a thing.



final result was 12g have not tested nor decided how I will test it.

This was done a new way for me.

After the mushies were chopped up and jammed in a jar as much solvent as possible was added. The solvent was made from 95% abv grain alcohol mixed with distilled water to dilute it to about 55% abv. This was shook up and placed in the freezer. After 12 hours it was removed and shaken and left out for 12 hours. Approx every 12 hours I would either take it out or put it in the freezer and shake. This was done for about 11-12 days. Then the mixture was first filtered through a nut milk bag while in the freezer. Several more gravity filtrations were done in the freezer to remove as much fat as possible. When finally happy one final filtration was done into a pyrex baking dish. This was lightly warmed to encourage evaporation eventually being fully dried in a warm oven with the door open and the goop was put in the freezer to harden and then was scrapped onto wax papper but still was too wet and was put back in the warm oven to get as much solvent out as possible. Then frozen again before being transferred into the little containers that are sold at smoke shops to hold Cannabis concentrates.

Just want to point out I probably didn't get everything in the mushrooms and probably lost a lot between that filtrations and what was lost in the process of getting the resin into the storage containers. Also they were probably weak mushrooms so idk how useful this stuff will be. I am currently keeping it in the fridge.

Any further questions I would be happy to answer
"If you change the way you look at things, the things you look at change."
~IDK who said this

User avatar
Saint.James
Posts: 6
Joined: Thu Nov 12, 2020 6:42 pm
Has thanked: 1 time
Been thanked: 2 times

Re: Fly Agaric Resin Extract

Post by Saint.James » Fri Nov 13, 2020 11:02 pm

This is awesome! just had this idea and decided to search it in the bar.
very curious to hear how it turned out! any reason you decided to go with multiple pulls using alcohol rather than slowly evaporating a tea? faster evap time?
Are there other alkaloids that are not water soluble? Anyway, cool experiment. Please keep us posted on your experience.
I plan on trying a small batch this weekend using only water. This is how I make my Rue extract with nice results:)

User avatar
tgt1002
Posts: 237
Joined: Sat Jun 13, 2020 2:31 am
Location: CT
Has thanked: 7 times
Been thanked: 66 times

Re: Fly Agaric Resin Extract

Post by tgt1002 » Sat Nov 14, 2020 11:14 pm

it was just a small why not experiment. not much became of it but I did not have a very effective way to vaporize it which is what I wanted to experiment the most with. I no longer have this sample but I will redo it. I plan to do something a little different. I will make a water extract and then refrigerate for a time then boil it off. Based on a reddit post I have seen this results in more of a powder than a sticky resin. I then will try to de-fat this substance with naptha to pull some of the stuff we do not want out of it and see if I can get it to a more pure stronger state. From there I do not know what i will do, but when this happens I will be sure to post about it. If you want to chat more directly DM me and we can exchange discord info :)
"If you change the way you look at things, the things you look at change."
~IDK who said this

Post Reply